Development and Validation of Quantitative Real-Time PCR for the Detection of Residual CHO Host Cell DNA and Optimization of Sample Pretreatment Method in Biopharmaceutical Products

Abstract Background The presence of residual DNA carried by biological products in the body may lead to an increased oncogenicity, infectivity, and immunomodulatory risk. Therefore, current agencies including WHO, EU, and the FDA limited the accepted amounts of residual DNA (less than 10 ng or 100 pg/dose). Among the methods of detecting residual DNA, qPCR is considered to be the most practical for residual DNA quantitation due to its sensitivity, accuracy, precision, and time-saving. Results In this study, the detection capacity of this method was determined by comparing the detected concentration of the commercial kit and the self-designed primer/probe set after the same treatment of the extraction method. Then, a universal sample pretreatment method based on a co-precipitant was optimized. The validation results demonstrated that the method has appropriate specificity, sensitivity, accuracy, and precision according to ICH guidelines. The limit of detection and quantitation reached 3 fg/ul and 0.3 pg/reaction respectively, which satisfies the requirement of limit of residual DNA detection in biologics. Spike recovery (82.3–105.7%) showed that the proposed qPCR assay was accurate and has good extraction efficiency. Moreover, the precision of the method based on intra- and inter-assay was 0.065–0.452% and 0.471–1.312%, respectively. Conclusions These results all indicated that the method for determination of residual DNA in biological products expressed from CHO cells is sensitive, accurate and robust.